bert-error-rate

Syntax


                        
                           bert-error-rate rate;

Hierarchy Level


                        
                           [edit interface ce1-fpc/pic/port]
                           
                           [edit interface ct1-fpc/pic/port]
                           
                           [edit interfaces interface-name ds0-options],
                           
                           [edit interfaces interface-name e1-options],
                           
                           [edit interfaces interface-name e3-options],
                           
                           [edit interfaces interface-name t1-options],
                           
                           [edit interfaces interface-name t3-options]

Release Information

Statement introduced before JUNOS Release 7.4.

Description

Configure the bit error rate to use in a BERT procedure. Applies to E1, E3, T1, or T3 interfaces, and to the channelized interfaces (DS3, OC3, OC12, STM1).

Note: When configuring CE1 interfaces on the 10-port Channelized E1/T1 IQE PIC, bert-error-rate must be set at the [edit interface ce1-fpc/pic/port] hierarchy level.

When configuring CT1 interfaces on the 10-port Channelized E1/T1 IQE PIC, bert-error-rate must be set at the [edit interface ct1-fpc/pic/port] hierarchy level.

Options

rate—Bit error rate.

Usage Guidelines

See Interface Diagnostics, Configuring E3 BERT Properties, Configuring T1 BERT Properties, Configuring T3 BERT Properties, and .

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.