[an error occurred while processing this directive] [an error occurred while processing this directive]

show gvrp

Syntax

show gvrp

Release Information

Command introduced in JUNOS Release 9.0 for EX-series switches.

Description

Display GARP VLAN Registration Protocol (GVRP) information.

Options

none — Displays all GVRP configuration attributes.

interface interface-name — (Optional) Displays GVRP statistics for a specific interface only.

Required Privilege Level

view

List of Sample Output

show gvrp

Output Fields

Table 1 lists the output fields for the show gvrp command. Output fields are listed in the approximate order in which they appear.

Table 1: show gvrp Output Fields

Field Name

Field Description

Global GVRP Configuration

Displays global GVRP information:

  • GVRP status—Displays whether GVRP is enabledor disabled.
  • Join—The maximum number of milliseconds the interfaces must wait before sending VLAN advertisements.
  • Leave— The number of milliseconds an interface must wait after receiving a Leave message to remove the interface from the VLAN specified in the message.
  • Leaveall—The interval at which Leave All messages are sent on interfaces. Leave all messages maintain current GVRP VLAN membership information in the network.

Interface based configuration

Displays interface-specific GVRP information:

  • Interface—The interface on which GVRP is configured..
  • GVRP status—Displays whether GVRP is enabled or disabled.

Sample Output

show gvrp

user@switch> show gvrp 
Global GVRP configuration
  GVRP status   : Enabled
  GVRP timers (ms)
    Join        : 40
    Leave       : 120
    Leaveall    : 2000
 
  Interface based configuration: 
  Interface		GVRP status	 
  ----------	-----------	 
  ge-0/0/0.0	Enabled

Updated: 2009-04-02

[an error occurred while processing this directive]