[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Configuring Which VLAN Ethernet Packet Types Dynamic Profiles Can Accept

To create dynamic single-tag VLANs and dynamic stacked (dual-tag) VLANs, you must specify what Ethernet packet type you want the single-tag VLAN or stacked VLAN dynamic profile to accept. You can configure which VLAN Ethernet packet types a dynamic profile accepts in the following ways:

Configuring the VLAN Ethernet Packet Type for Single-Tag VLAN Dynamic Profiles

To configure the VLAN Ethernet packet type the VLAN dynamic profile can accept:

  1. Access the interface over which you want to create dynamic VLANs.
    user@host# edit interfaces ge-0/0/0
  2. Access the VLAN [auto-configure] hierarchy level.
    [edit interfaces ge-0/0/0]
    user@host# edit auto-configure
  3. Access the [vlan-ranges] hierarchy level.
    [edit interfaces ge-0/0/0 auto-configure]
    user@host# edit vlan-ranges
  4. Access the VLAN dynamic profile for which you want to configure VLAN ranges.
    [edit interfaces ge-0/0/0 auto-configure vlan-ranges]
    user@host# edit dynamic-profile VLAN-PROF1
  5. Specify what VLAN Ethernet packet type the VLAN or stacked VLAN dynamic profile accepts.

    Note: This release supports only INET (IPv4) Ethernet packet types.

    [edit interfaces ge-0/0/0 auto-configure vlan-ranges]
    user@host# set accept inet

Configuring the VLAN Ethernet Packet Type for Stacked VLAN Dynamic Profiles

To configure the VLAN Ethernet packet type the stacked VLAN dynamic profile can accept:

  1. Access the interface over which you want to create dynamic VLANs.
    user@host# edit interfaces ge-0/0/0
  2. Access the VLAN [auto-configure] hierarchy level.
    [edit interfaces ge-0/0/0]
    user@host# edit auto-configure
  3. Access the [stacked-vlan-ranges] hierarchy level.
    [edit interfaces ge-0/0/0 auto-configure]
    user@host# edit stacked-vlan-ranges
  4. Access the VLAN dynamic profile for which you want to configure VLAN ranges.
    [edit interfaces ge-0/0/0 auto-configure stacked-vlan-ranges]
    user@host# edit dynamic-profile STACKED-VLAN-PROF1
  5. Specify what VLAN Ethernet packet type the stacked VLAN dynamic profile accepts.

    Note: This release supports only INET (IPv4) Ethernet packet types.

    [edit interfaces ge-0/0/0 auto-configure stacked-vlan-ranges]
    user@host# set accept inet
[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

[an error occurred while processing this directive]