Configuring Dynamic Access Routes for DHCP Subscriber Management

You can dynamically configure access routes based on the values specified in RADIUS Framed-Route Attribute [22].

To dynamically configure access routes:

1. Configure the route prefix for the access route as a variable.

   [edit dynamic-profiles profile-name routing-options]

   user@host# edit access route $junos-framed-route-ip-address-prefix

2. Configure the next-hop address as a variable.

   [edit dynamic-profiles profile-name routing-options access route “$junos-framed-route-ip-address-prefix”]

   user@host# set next-hop $junos-framed-route-nextho

3. Configure the cost metric as a variable.

   user@host# set metric $junos-framed-route-cost

4. Configure the route distance as a variable.

   user@host# set preference $junos-framed-route-distance

Related Topics

• Access and Access-Internal Routes for DHCP Subscriber Management
• RADIUS IETF Attributes Supported by the AAA Service Framework
• Configuring Dynamic Access-Internal Routes for DHCP Subscriber Management
• Verifying the Configuration of Access and Access-Internal Routes for DHCP Subscriber Management