Configuring Dynamic Scheduling and Queuing in a Dynamic Profile for Subscriber Access

You can configure dynamic scheduling and queuing in dynamic profile for subscriber access.

To configure dynamic scheduling and queuing for subscriber access:

1. Configure a static or dynamic subscriber interface.

   See Configuring Static Subscriber Interfaces in Dynamic Profiles and Configuring Dynamic Subscriber Interfaces Using IP Demux Interfaces in Dynamic Profiles.

2. Configure CoS parameters in a dynamic profile.
   1. Configure the dynamic profile.

      See Configuring a Basic Dynamic Profile.

   2. Configure traffic shaping and scheduling parameters in the dynamic profile using a traffic-control profile.

      See Configuring Traffic Shaping and Scheduling in a Dynamic Profile.

   3. Configure the schedulers and scheduler map in the dynamic profile.

      See Configuring Schedulers in a Dynamic Profile.

   4. Apply CoS parameters to a subscriber interface by referencing an interface in the dynamic profile.

      See Applying CoS to an Interface in a Dynamic Profile.

3. (Optional) Configure variables in access and service profiles to enable RADIUS to activate subscriber and upgrade services through CoA.

   Note: Do not instantiate a CoA request using a service dynamic profile that is already in use on the same logical interface.

   Because you have configured the scheduler map in the dynamic profile, queues are merged when subscribers change services. Other CoS parameters are replaced.

   When multiple subscribers are enabled on a DHCP subscriber interface, the system does not replace the parameters. Instead, it combines the values of the parameters to their maximum scalar value.

   1. Configure CoS variables in a dynamic profile.

      See Configuring User-Defined CoS Variables in a Dynamic Service Profile

   2. (Optional) Enable multiple clients for the same subscriber (logical interface) to aggregate attributes by configuring the aggregate-clients option for the dynamic profile attached to a DHCP subscriber interface.

      See Attaching Dynamic Profiles to DHCP Subscriber Interfaces.

4. Configure the remaining static CoS parameters in the [edit class-of-service] hierarchy.
   1. Configure the drop profiles. The scheduler map and schedulers are already configured in the dynamic profile.

      See the JUNOS Class of Service Configuration Guide for information about configuring the scheduler map.

   2. Enable the hierarchical scheduler for the interface.

   See the JUNOS Class of Service Configuration Guide for information about configuring the remaining CoS parameters.

Related Topics

• CoS for Subscriber Access Overview
• Example: Configuring Dynamic Scheduling and Queuing for Subscriber Access