1

User-Name

• Name of user to be authenticated
• Configurable username override

2

User-Password

• Password of user to be authenticated Password Authentication Protocol (PAP)
• Configurable password override
• Password Authentication Protocol (PAP)

4

NAS-IP-Address

IP address of the network access server (NAS) that is requesting authentication of the user

5

NAS-Port

Physical port number of the NAS that is authenticating the user

6

Service-Type

Type of service the user has requested or the type of service to be provided

8

Framed-IP-Address

• IP address to be configured for the user
• 0.0.0.0 or absence is interpreted as 255.255.255.254

9

Framed-IP-Netmask

• IP network to be configured for the user when the user is a router to a network
• Absence implies 255.255.255.255

11

Filter-ID

• Name of the filter list for the user
• Interpreted as input policy name

18

Reply-Message

• Text that may be displayed to the user
• Only the first instance of this attribute is used

22

Framed-Route

String that provides routing information to be configured for the user on the NAS; in the format:

<addr>[/<maskLen>] [<nexthop> [<cost>]] (tag <tagValue>] [distance <distValue>]

25

Class

An arbitrary value that the NAS includes in all accounting packets for the user if supplied by the RADIUS server

27

Session-Timeout

Maximum number of consecutive seconds of service to be provided to the user before termination of the session

31

Calling-Station-ID

Allows the NAS to send the phone number from which the call originated

32

NAS-Identifier

Identifies the NAS originating the request

40

Acct-Status-Type

Indicates whether this Accounting-Request marks the beginning of the user service (Start), the end (Stop), or the interim (Interim-Update)

41

Acct-Delay-Time

Indicates how many seconds the client has been trying to send a particular record

42

Acct-Input-Octets

Indicates how many octets have been received from the port during the time this service has been provided

43

Acct-Output-Octets

Indicates how many octets have been sent to the port during the time this service has been provided

44

Acct-Session-ID

Unique accounting identifier that makes it easy to match start and stop records in a log file. The identifier can be in one of the following formats:

• decimal—For example, 435264
• description—In the generic format, jnpr interface-specifier:subscriber-session-id; Ffor example, jnpr fastEthernat 3/2.6:1010101010101

45

Acct-Authentic

Indicates how the user was authenticated: whether by RADIUS, the NAS itself, or another remote authentication protocol

46

Acct-Session-Time

Indicates how long in seconds that the user has received service

47

Acct-Input-Packets

Indicates how many packets have been received from the port during the time this service has been provided to a framed user

48

Acct-Output-Packets

Indicates how many packets have been sent to the port in the course of delivering this service to a framed user

49

Acct-Terminate-Cause

Contains the reason the service (a PPP session) was terminated. The service can be terminated for the following reasons:

• User Request (1)—User initiated the disconnect (log out)
• Idle Timeout (4)—Idle timer has expired
• Session Timeout (5)—Client reached the maximum continuous time allowed on the service or session
• Admin Reset (6)—System administrator terminated the session
• Port Error (8)—PVC failed; no hardware or no interface
• NAS Error (9)—Negotiation failures, connection failures, or address lease expiration
• NAS Request (10)—PPP challenge timeout, PPP request timeout, tunnel establishment failure, PPP bundle failure, IP address lease expiration, PPP keep-alive failure, Tunnel disconnect, or an unaccounted-for error

52

Acct-Input-Gigawords

Indicates how many times the Acct-Input-Octets counter has wrapped around 2^32 during the time this service has been provided. Can be present in Accounting-Request records only where the Acct-Status-Type is set to Stop or Interim-Update

53

Acct-Output-Gigawords

Indicates how many times the Acct-Output-Octets counter has wrapped around 2^32 in the course of delivering this service. Can be present in Accounting-Request records only where the Acct-Status-Type is set to Stop or Interim-Update

55

Event-Timestamp

Records the time that this event occurred on the NAS, in seconds, since January 1, 1970 00:00 UTC

61

NAS-Port-Type

Indicates the type of physical port the NAS is using to authenticate the user

85

Acct-Interim-Interval

Number of seconds between each interim accounting update for this session

87

NAS-Port-ID

Text string that identifies the physical interface of the NAS that is authenticating the user

88

Framed-Pool

Name of an assigned address pool that should be used to assign an address for the user