show gvrp
Syntax
- show gvrp
Release Information
Command introduced in JUNOS Release 9.0
for EX-series switches.
Description
Display GARP VLAN Registration Protocol (GVRP)
information.
Options
none — Displays all GVRP
configuration attributes.
interface interface-name
— (Optional) Displays GVRP statistics for
a specific interface only.
Required Privilege Level
view
List of Sample Output
show gvrp
Output Fields
Table 1 lists the output fields
for the show gvrp command. Output fields are listed in the
approximate order in which they appear.
Table 1: show gvrp Output Fields
|
Field Name
|
Field Description
|
|
Global GVRP Configuration
|
Displays global GVRP information:
-
GVRP status—Displays whether GVRP is enabledor disabled.
-
Join—The maximum number of milliseconds
the interfaces must wait before sending VLAN advertisements.
-
Leave— The number of milliseconds an interface
must wait after receiving a Leave message to remove the interface
from the VLAN specified in the message.
-
Leaveall—The interval at which Leave All
messages are sent on interfaces. Leave all messages maintain current
GVRP VLAN membership information in the network.
|
|
Interface based configuration
|
Displays interface-specific GVRP information:
-
Interface—The interface on which GVRP is
configured..
-
GVRP status—Displays whether GVRP is enabled or disabled.
|
Sample Output
show gvrp
user@switch> show gvrp
Global GVRP configuration
GVRP status : Enabled
GVRP timers (ms)
Join : 40
Leave : 120
Leaveall : 2000
Interface based configuration:
Interface GVRP status
---------- -----------
ge-0/0/0.0 Enabled
