write -config chassis -T system:mm[x]
Command supported by JUNOS Release 9.1 and later.
(JCS management module CLI) Save the management module configuration to the chassis of the JCS 1200 platform (in the midplane NVRAM). This command is useful for creating a backup copy of the JCS management module configuration.
-config chassis—Specify the location where the configuration is saved.
-T system:mm[x]—Specify the JCS management module as the target of the command (the configuration to be saved). Replace x with a value of 1 or 2.
supervisor
When you enter this command, you are provided feedback on the status of your request.
system> write —config chassis –T
system:mm[1]
OK Configuration settings were successfully saved to the chassis.