volts

Syntax

volts -T target

Release Information

Command supported by JUNOS Release 9.1 and later.

Description

(JCS 1200 platform only) Show voltage information for components in the JCS chassis. This information is useful for viewing current voltage values and voltage threshold settings.

Options

-T target—Specify the target of the volts command. Valid targets for this command are:

• system:blade[x]—Specify a Routing Engine as the command target. Replace x with the Routing Engine slot number (1 through 12).
• system:switch[x]—Specify a JCS switch module as the command target. Replace x with the switch number (1 or 2).
• system:mm[x]—Specify a JCS management module as the command target. Replace x with the primary management module number (1 or 2).

Required Privilege Level

operator (display)

Related Topics

• Displaying Voltage Information

List of Sample Output

Output Fields

Table 30 lists the output fields for the volts command. Output fields are listed in the approximate order in which they appear.

Table 30: volts Output Fields

Sample Output

Source     Value     Warning           Reset             Hysteresis
+5v        +4.84		 (+4.50,+5.25)     (+4.85,+5.15)     (+0.35,+0.10)
+3.3v      +3.26		 (+3.00,+3.47)     (+3.20,+3.40)     (+0.20,+0.07)
+12v       +12.03		 (+10.80,+12.60)   (+11.64,+12.36)   (+0.84,+0.24)
–5v        —4.90		 (-5.50,–4.75)     (-5.15,-4.85)     (+0.35,+0.10)
+2.5v      +2.48		 (+2.25,+2.63)     (+2.42,+2.58)     (+0.17,+0.05)
+1.8v      +1.76		 (+1.62,+1.89)     (+1.74,+1.86)     (+0.12,+0.03)

Sample Output

Source           Value     Warning 
1.8 V Sense      +1.79     (+1.61,+1.97) 
1.8VSB Sense     +1.83     (+1.61,+1.97)
12V Sense        +12.33    (+10.79,+13.21) 
12VSB Sense      +12.30    (+10.74,+13.19)
3.3V Sense       +3.31     (+2.96,+3.62)
5V Sense         +5.06     (+4.39,+5.48)