You can display the current health status for the JCS 1200 platform to determine if a system components are operating property. For each component, health status can be:
Display health status for the JCS 1200 platform using the JCS management module CLI health command.
The following sample output appears when health status is displayed for all components installed in the JCS 1200 platform:
system> health —l a
OK
mm[1] : OK
mm[2] : OK
blade[1] : OK
blade[2] : OK
blade[3] : OK
blade[4] : OK
blade[5] : Minor
blade[6] : OK
power[1] : OK
power[2] : OK
power[3] : OK
power[4] : OK
blower[1] : OK
blower[2] : OK
blower[3] : OK
blower[4] : OK
switch[1] : OK
switch[2] : OK
The following sample output appears when health status is displayed for a JCS Routing Engine:
system> health -l –a T system:blade[5]
system: Minor
blade[5]:Minor
5V over voltage
CPU1 temperature warning
In this example, a minor warning appears for the Routing Engine in slot 5. The voltage level has risen, causing a temperature increase.