(JCS management module CLI) Display information
about JCS hardware components and component configuration.
Options
-T target—Specify
a command target to display information about a specific hardware
component. You can only display information for one target at a time.
Valid targets for this command include:
system:blade[x]—Specify
a Routing Engine as the command target. Replace x with the Routing Engine slot number (1 through 12)
system:blower[x]—Specify
a JCS fan module as the command target. Replace x with the fan module number (1 through 4).
system:mm[x]—Specify
a JCS management module as the command target. Replace x with the primary management module number (1 or 2).
system:mt[x]—Specify
a JCS media tray as the command target. Replace x with the media tray number (1 or 2).
system:mux[x]—Specify
a JCS MUX card as the command target. Replace x with the MUX card number (1 or 2).
system:power[x]—Specify
a JCS power module as the command target. Replace x with the power module number (1 through 4).
system:switch[x]—Specify
a JCS switch module as the command target. Replace x with the switch module number (1 or 2).
system:tap[x]—Specify
the JCS alarm panel as the command target.