baydata

Syntax

baydata <–b n> (-clear | -data “data-definition”)

Release Information

Command supported by JUNOS Release 9.1 and later.

Description

(JCS management module CLI) Display, configure, or remove informational data (blade bay data) associated with Routing Engine blades.

Options

-b n—(Optional) Specify a specific Routing Engine. Replace n with the Routing Engine slot number (1 through 12). If a Routing Engine is not specified, the command applies to all Routing Engines in the JCS chassis.

–clear—Remove the blade bay data definition.

-data “data-definition”—Set the blade bay data. Blade bay data is an ASCII text string with the following format: Vn-JCSn-SDn-PSDn-REPn-REBn-PRDplatform-type. Enclose the text string in double quotation marks (” “).

• Vn—Version number of the blade bay data. Replace n with a version number. The accepted value is 01.
• JCSn—JCS identifier. Replace n with the ID number of the JCS. The range of values is 01 through 03.
• SDn—RSD identifier. Replace n with the ID number of the RSD. The range of values is 01 through 03.
• PSDn—PSD identifier. Replace n with the ID number of the PSD. The range is 01 through 31.
• REPn—Slot number of the primary Routing Engine in a primary, backup Routing Engine pair. Replace n with the slot number of the Routing Engine. The range is 01 through 12.
• REBn—Slot number of the backup Routing Engine in a primary, backup Routing Engine pair. Replace n with the slot number of the Routing Engine. The range is 01 through 12.
• PRDplatform-type—Routing platform type. Replace platform-type with one of the following values: T1600, T640, or T320.

Required Privilege Level

supervisor

Related Topics

• Configuring the Routing Engine Parameters (Blade Bay Data)
• control-slot-numbers
• control-system-id
• root-domain-id

List of Sample Output

Output Fields

Table 11 lists the output fields for the baydata command. Output fields are listed in the approximate order in which they appear.

Table 11: baydata Output Fields

Sample Output

Bay   Status           Definition
1     Unsupported     
2     No blade present
3     Supported         V01–JCS01–SD01–PSD01–REP03–REB04–PRDT640
4     Supported         V01–JCS01–SD01–PSD01–REP03–REB04–PRDT640
5     Supported         V01–JCS01–SD01–PSD01–REP05–REB06–PRDT640
6     Supported         V01–JCS01–SD01–PSD01–REP05–REB06–PRDT640
7     No blade present
8     No blade present
9     No blade present
10    No blade present
11    No blade present
12    No blade present

OK

OK

OK