rejoin-timeout (Aggregated Multiservices)
Statement introduced in Junos OS Release 11.4.
Support added in Junos OS Release 19.3R2 for Next Gen Services on MX Series routers MX240, MX480 and MX960 with the MX-SPC3 services card.
Configure the time by when failed members (members in the DISCARD state) should rejoin the aggregated Multiservices (AMS) interface automatically. All members that do not rejoin by the configured time are moved to the INACTIVE state and the traffic meant for each of the members is dropped.
If multiple members fail around the same time, then they are held in the DISCARD state using a single timer. When the timer expires, all the failed members move to INACTIVE state at the same time.
If you do not configure a value, the default value of 120 seconds is used.
rejoin-timeout—Time, in seconds, by which a failed member must rejoin.
Default: 120 seconds
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.