host-address-base (Source NAT Next Gen Services)
Statement introduced in Junos OS Release 19.3R2 on MX Series routers (MX240, MX480 and MX960) running Next Gen Services with the MX-SPC3 services card.
Configure static mapping of the source address.
For static NAT that is performed on the services card, configure a one-to-one static shifting of a range of original source addresses to the range of addresses in the source pool by specifying the base address of the original source address range.
For example, if the host address base is 198.51.100.30 and the NAT pool uses the range 203.0.113.10 to 203.0.113.20, then 198.51.100.30 translates to 203.0.113.10, 198.51.100.31 translates to 203.0.113.11, and so on.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.