Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

show services stateful-firewall sip-register

 

Syntax

Release Information

Command introduced in Junos OS Release 7.4.

Description

Display stateful firewall Session Initiation Protocol (SIP) register information.

Options

count(Optional) Display a count of the matching entries.
brief(Optional) Display brief SIP register information.
extensive(Optional) Display detailed SIP register information.
terse(Optional) Display terse SIP register information.
application-protocol(Optional) Display information about one of the following application protocols:
  • bootp—(SIP only) Bootstrap protocol

  • dce-rpc—(SIP only) Distributed Computing Environment-Remote Procedure Call protocols

  • dce-rpc-portmap—(SIP only) Distributed Computing Environment-Remote Procedure Call protocols portmap service

  • dns—(SIP only) Domain Name System protocol

  • exec—(SIP only) Exec

  • ftp—(SIP only) File Transfer Protocol

  • h323—H.323 standards

  • icmp—Internet Control Message Protocol

  • iiop—Internet Inter-ORB Protocol

  • login—Login

  • netbios—NetBIOS

  • netshow—NetShow

  • realaudio—RealAudio

  • rpc—Remote Procedure Call protocol

  • rpc-portmap—Remote Procedure Call protocol portmap service

  • rtsp—Real-Time Streaming Protocol

  • shell—Shell

  • sip—Session Initiation Protocol

  • snmp—Simple Network Management Protocol

  • sqlnet—SQLNet

  • tftp—Trivial File Transfer Protocol

  • traceroute—Traceroute

  • winframe—WinFrame

destination-port destination-port(Optional) Display information for a particular destination port.
destination-prefix destination-prefix(Optional) Display information for a particular destination prefix. The range of values is from 0 to 65535.
interface interface-name(Optional) Display information about a particular interface. On M Series and T Series routers, the interface-name can be sp-fpc/pic/port or rspnumber.
limit number(Optional) Maximum number of entries to display.
protocol(Optional) Display information about one of the following IP types:
  • ah—IPsec Authentication Header protocol

  • egp—An exterior gateway protocol

  • esp—IPsec Encapsulating Security Payload protocol

  • gre—A generic routing encapsulation protocol

  • icmp—Internet Control Message Protocol

  • igmp—Internet Group Management Protocol

  • ipip—IP-within-IP Encapsulation Protocol

  • ipv6—IPv6 within IP

  • ospf—Open Shortest Path First protocol

  • pim—Protocol Independent Multicast protocol

  • rsvp—Resource Reservation Protocol

  • sctp—Stream Control Protocol

  • tcp—Transmission Control Protocol

  • udp—User Datagram Protocol

service-set service-set(Optional) Display information for a particular service set.
source-port source-port(Optional) Display information for a particular source port. The range of values is from 0 to 65535.
source-prefix source-prefix(Optional) Display information for a particular source prefix.

Required Privilege Level

view

List of Sample Output

show services stateful-firewall sip-register extensive

Output Fields

Table 1 lists the output fields for the show services stateful-firewall sip-register command. Output fields are listed in the approximate order in which they appear.

Table 1: show services stateful-firewall sip-register Output Fields

Field Name

Field Description

Interface

Name of an adaptive services interface.

Service set

Name of a service set.

SIP Register

Register information header.

Protocol

Protocol used for this flow.

Registered IP

Register IP address.

Port

Register port number.

Expiration timeout

Configured lifetime, in seconds.

Timeout remaining

Lifetime remaining, in seconds.

From

Initiator address.

To

Responder address.

Call ID

SIP call identification string.

Sample Output

show services stateful-firewall sip-register extensive

user@host> show services stateful-firewall sip-register extensive