TechLibrary

Navigation

Table of Contents

Guide That Contains This Content

[+] Expand All

[-] Collapse All

Verify RSVP Interfaces

Purpose

Display the status of each interface on which RSVP is enabled to determine where the configuration error occurred.

Action

To verify the status of RSVP interfaces, enter the following command from the ingress, transit, and egress routers:

user@host> show rsvp interface

Sample Output 1

user@R1> show rsvp interface
RSVP interface: 3 active
                   Active  Subscr- Static      Available   Reserved    Highwater
Interface   State  resv   iption  BW          BW          BW          mark
so-0/0/0.0  Up         0   100%  155.52Mbps  155.52Mbps  0bps        0bps       
so-0/0/1.0  Up         0   100%  155.52Mbps  155.52Mbps  0bps        0bps       
so-0/0/2.0  Up          0    100%  155.52Mbps  155.52Mbps  0bps        0bps       

user@R3> show rsvp interface  
RSVP interface: 3 active
                   Active  Subscr- Static      Available   Reserved    Highwater
Interface   State  resv    iption  BW          BW          BW          mark
so-0/0/0.0  Up         0   100%  155.52Mbps  155.52Mbps  0bps        0bps       
so-0/0/1.0  Up         0   100%  155.52Mbps  155.52Mbps  0bps        0bps       
so-0/0/2.0  Up          0    100%  155.52Mbps  155.52Mbps  0bps        0bps       
<<< Missing interface so-0/0/3.0

user@R6> show rsvp interface 
RSVP interface: 4 active
                   Active  Subscr- Static      Available   Reserved    Highwater
Interface   State  resv    iption  BW          BW          BW          mark
so-0/0/0.0  Up         0   100%  155.52Mbps  155.52Mbps  0bps        0bps       
so-0/0/1.0  Up         0   100%  155.52Mbps  155.52Mbps  0bps        0bps       
so-0/0/2.0  Up         0   100%  155.52Mbps  155.52Mbps  0bps        0bps       
so-0/0/3.0  Up          0    100%  155.52Mbps  155.52Mbps  0bps        0bps

Sample Output 2

user@R1> show rsvp interface
RSVP interface: 3 active
                  Active Subscr- Static      Available   Reserved    Highwater
Interface   State resv   iption  BW          BW          BW          mark
so-0/0/0.0  Up         0   100%  155.52Mbps  155.52Mbps  0bps        0bps       
so-0/0/1.0  Up         0   100%  155.52Mbps  155.52Mbps  0bps        0bps       
so-0/0/2.0  Up          1    100%  155.52Mbps  155.52Mbps  0bps        0bps       

user@R3> show rsvp interface                   
RSVP interface: 4 active
                  Active Subscr- Static      Available   Reserved    Highwater
Interface   State resv   iption  BW          BW          BW          mark
so-0/0/0.0  Up         0   100%  155.52Mbps  155.52Mbps  0bps        0bps       
so-0/0/1.0  Up         0   100%  155.52Mbps  155.52Mbps  0bps        0bps       
so-0/0/2.0  Up          1    100%  155.52Mbps  155.52Mbps  0bps        0bps       
so-0/0/3.0  Up          1    100%  155.52Mbps  155.52Mbps  0bps        0bps       

user@R6> show rsvp interface 
RSVP interface: 4 active
                  Active Subscr- Static      Available   Reserved    Highwater
Interface   State resv   iption  BW          BW          BW          mark
so-0/0/0.0  Up         0   100%  155.52Mbps  155.52Mbps  0bps        0bps       
so-0/0/1.0  Up         0   100%  155.52Mbps  155.52Mbps  0bps        0bps       
so-0/0/2.0  Up         0   100%  155.52Mbps  155.52Mbps  0bps        0bps       
so-0/0/3.0  Up          1    100%  155.52Mbps  155.52Mbps  0bps        0bps

Meaning

Sample Output 1 shows that even though each router has interfaces that are up and have RSVP active, there are no reservations (Active resv) on any of the routers. In this example, we would expect at least one reservation on the ingress and egress routers, and two reservations on the transit router.

In addition, interface so-0/0/3 on transit router R3 is not included in the configuration. The inclusion of this interface is critical to the success of the LSP.

In contrast to Sample Output 1 and to illustrate correct output, Sample Output 2 shows the relevant interfaces with active reservations.