Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Verify the LSP
Purpose
Confirm that interfaces are configured for OSPF, the OSPF protocol is configured correctly and that neighbors are established.
Action
To verify the LSP, enter the following command on the ingress, transit, and egress routers:
user@host> show mpls lsp extensive
Sample Output 1
user@R1> show mpls lsp extensive Ingress LSP: 1 sessions 10.0.0.6 From: 10.0.0.1, State: Dn, ActiveRoute: 0, LSPname: R1-to-R6 ActivePath: (none) LoadBalance: Random Encoding type: Packet, Switching type: Packet, GPID: IPv4 Primary State: Dn 11 Oct 19 18:06:04 No Route toward dest[78 times] 10 Oct 19 17:08:09 Deselected as active Created: Mon Oct 18 21:48:42 2004 Total 1 displayed, Up 0, Down 1 Egress LSP: 0 sessions Total 0 displayed, Up 0, Down 0 Transit LSP: 0 sessions Total 0 displayed, Up 0, Down 0
Sample Output 2
user@R3> show mpls lsp extensive Ingress LSP: 0 sessions Total 0 displayed, Up 0, Down 0 Egress LSP: 0 sessions Total 0 displayed, Up 0, Down 0 Transit LSP: 0 sessions Total 0 displayed, Up 0, Down 0
Sample Output 3
user@R6> show mpls lsp extensive Ingress LSP: 1 sessions To From State Rt ActivePath P LSPname 10.0.0.1 10.0.0.6 Dn 0 - R6-to-R1 Total 1 displayed, Up 0, Down 1 Egress LSP: 0 sessions Total 0 displayed, Up 0, Down 0 Transit LSP: 0 sessions Total 0 displayed, Up 0, Down 0
Sample Output 4
user@R1> show mpls lsp extensive
Ingress LSP: 1 sessions
10.0.0.6
From: 10.0.0.1, State: Up, ActiveRoute: 1, LSPname: R1-to-R6
ActivePath: (primary)
LoadBalance: Random
Encoding type: Packet, Switching type: Packet, GPID: IPv4
*Primary State: Up
Received RRO (ProtectionFlag 1=Available 2=InUse 4=B/W 8=Node 10=SoftPreempt):
10.1.13.2 10.1.36.2
5 Oct 19 10:37:55 Selected as active path
4 Oct 19 10:37:55 Record Route: 10.1.13.2 10.1.36.2
3 Oct 19 10:37:55 Up
2 Oct 19 10:37:10 No Route toward dest[1029 times]
1 Oct 18 21:48:42 Originate Call
Created: Mon Oct 18 21:48:42 2004
Total 1 displayed, Up 1 , Down 0
Egress LSP: 0 sessions
Total 0 displayed, Up 0, Down 0
Transit LSP: 0 sessions
Total 0 displayed, Up 0, Down 0
Sample Output 5
user@R3> show mpls lsp extensive Ingress LSP: 0 sessions Total 0 displayed, Up 0, Down 0 Egress LSP: 0 sessions Total 0 displayed, Up 0, Down 0 Transit LSP: 1 sessions 10.0.0.6 From: 10.0.0.1, LSPstate: Up, ActiveRoute: 1 LSPname: R1-to-R6 , LSPpath: Primary Suggested label received: -, Suggested label sent: - Recovery label received: -, Recovery label sent: 3 Resv style: 1 FF, Label in: 100368, Label out: 3 Time left: 154, Since: Tue Oct 19 10:25:24 2004 Tspec: rate 0bps size 0bps peak Infbps m 20 M 1500 Port number: sender 1 receiver 47933 protocol 0 PATH rcvfrom: 10.1.13.1 (so-0/0/2.0) 209 pkts Adspec: received MTU 1500 sent MTU 1500 PATH sentto: 10.1.36.2 (so-0/0/3.0) 209 pkts RESV rcvfrom: 10.1.36.2 (so-0/0/3.0) 209 pkts Record route: 10.1.13.1 <self> 10.1.36.2 Total 1 displayed, Up 1, Down 0
Sample Output 6
user@R6> show mpls lsp extensive
Ingress LSP: 1 sessions
10.0.0.1
From: 10.0.0.6, State: Dn, ActiveRoute: 0, LSPname: R6-to-R1
ActivePath: (none)
LoadBalance: Random
Encoding type: Packet, Switching type: Packet, GPID: IPv4
Primary State: Dn
2 Oct 19 13:01:54 10.1.56.2: MPLS label allocation failure [9 times]
1 Oct 19 12:57:51 Originate Call
Created: Tue Oct 19 12:57:51 2004
Total 1 displayed, Up 0, Down 1
Egress LSP: 1 sessions
10.0.0.6
From: 10.0.0.1, LSPstate: Up, ActiveRoute: 0
LSPname: R1-to-R6, LSPpath: Primary
Suggested label received: -, Suggested label sent: -
Recovery label received: -, Recovery label sent: -
Resv style: 1 FF, Label in: 3, Label out: -
Time left: 148, Since: Tue Oct 19 10:30:03 2004
Tspec: rate 0bps size 0bps peak Infbps m 20 M 1500
Port number: sender 1 receiver 47933 protocol 0
PATH rcvfrom: 10.1.36.1 (so-0/0/3.0) 206 pkts
Adspec: received MTU 1500
PATH sentto: localclient
RESV rcvfrom: localclient
Record route: 10.1.13.1 10.1.36.1 <self>
Total 1 displayed, Up 1, Down 0
Transit LSP: 0 sessions
Total 0 displayed, Up 0, Down 0
Meaning
Sample Outputs 1, 2, and 3 show that the LSP and the reverse LSP are down:
- Sample Output 1 from ingress router R1 shows that LSP R1-to-R6 does not have a route towards the destination (R6).
- Sample Output 2 from transit router R3 shows that there are no LSP sessions.
- Sample Output 3 from egress router R6 also shows that reverse LSP R6-to-R1 is down.
Sample Outputs 4, 5, and 6 show that the LSP is up and the reverse LSP is down:
- Sample Output 4 from ingress router R1 shows that LSP R1-to-R6 is up and there are no egress LSP sessions.
- Sample Output 5 from transit router R3 shows that there is one ingress LSP session (R1-to-R6) and no egress LSP sessions.
- Sample Output 6 from egress router R6 shows that LSP R6-to-R1 is down due to an MPLS label allocation failure.
