Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Verify the LSP
Purpose
Confirm that interfaces are configured for IS-IS, that the IS-IS protocol is configured correctly, and that adjacencies are established.
Action
To verify the label-switched path (LSP), enter the following command on the ingress, transit, and egress routers:
user@host> show mpls lsp extensive
Sample Output 1
user@R1> show mpls lsp extensive Ingress LSP: 1 sessions 10.0.0.6 From: 10.0.0.1, State: Dn, ActiveRoute: 0 , LSPname: R1-to-R6 ActivePath: (none) LoadBalance: Random Encoding type: Packet, Switching type: Packet, GPID: IPv4 Primary State: Dn 24 Oct 21 13:48:01 No Route toward dest [3 times] 23 Oct 21 13:47:44 Deselected as active 22 Oct 21 13:47:43 No Route toward dest[2 times] 21 Oct 21 13:47:43 ResvTear received 20 Oct 21 13:47:43 Down 19 Oct 21 13:47:43 10.1.13.2: No Route toward dest[2 times] 18 Oct 21 13:47:38 Record Route: 10.1.13.2 10.1.36.2 [...Output truncated...] Created: Tue Oct 19 21:22:53 2004 Total 1 displayed, Up 0, Down 1 Egress LSP: 0 sessions Total 0 displayed, Up 0, Down 0 Transit LSP: 0 sessions Total 0 displayed, Up 0, Down 0
Sample Output 2
user@R3> show mpls lsp extensive Ingress LSP: 0 sessions Total 0 displayed, Up 0, Down 0 Egress LSP: 0 sessions Total 0 displayed, Up 0, Down 0 Transit LSP: 0 sessions Total 0 displayed, Up 0, Down 0
Sample Output 3
user@R6> show mpls lsp extensive
Ingress LSP: 1 sessions
10.0.0.1
From: 10.0.0.6, State: Dn, ActiveRoute: 0 , LSPname: R6-to-R1
ActivePath: (none)
LoadBalance: Random
Encoding type: Packet, Switching type: Packet, GPID: IPv4
Primary State: Dn
Will be enqueued for recomputation in 3 second(s).
13 Oct 21 14:23:33 CSPF failed: no route toward 10.0.0.1[90 times]
12 Oct 21 13:39:56 Deselected as active
11 Oct 21 13:39:56 CSPF: could not determine self
[...Output truncated...]
Created: Tue Oct 19 22:28:30 2004
Total 1 displayed, Up 0, Down 1
Egress LSP: 0 sessions
Total 0 displayed, Up 0, Down 0
Transit LSP: 0 sessions
Total 0 displayed, Up 0, Down 0
Meaning
The sample output shows that LSP R1-to-R6 and the reverse LSP R6-to-R1 are down, and there are no LSP sessions on transit router R3.
