Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Verify the LSP Again

    Purpose

    After taking the appropriate action to correct the error, the label-switched path (LSP) needs to be checked again to confirm that the problem in the RSVP layer has been resolved.

    Action

    To verify that the LSP is up and traversing the network as expected, enter the following command from the ingress, egress, and transit routers:

    user@host> show mpls lsp extensive

    Sample Output 1

    user@R1> show mpls lsp extensive
    Ingress LSP: 1 sessions
    
    10.0.0.6
      From: 10.0.0.1, State: Up,  ActiveRoute: 1 ,  LSPname: R1-to-R6
      ActivePath:  (primary)
      LoadBalance: Random
      Encoding type: Packet, Switching type: Packet, GPID: IPv4
     *Primary                    State: Up
        Computed ERO (S [L] denotes strict [loose] hops): (CSPF metric: 20)
      10.1.13.2 S 10.1.36.2 S  
        Received RRO (ProtectionFlag 1=Available 2=InUse 4=B/W 8=Node 10=SoftPreempt):
              10.1.13.2 10.1.36.2
        5 Oct 21 15:52:07 Selected as active path
        4 Oct 21 15:52:07 Record Route:  10.1.13.2 10.1.36.2
        3 Oct 21 15:52:07 Up
        2 Oct 21 15:52:07 Originate Call
        1 Oct 21 15:52:07 CSPF: computation result accepted
      Created: Thu Oct 21 15:52:06 2004
    Total 1 displayed,  Up 1 , Down 0
    
    Egress LSP: 1 sessions
    
    10.0.0.1
      From: 10.0.0.6, LSPstate: Up, ActiveRoute: 0
       LSPname: R6-to-R1 , LSPpath: Primary
      Suggested label received: -, Suggested label sent: -
      Recovery label received: -, Recovery label sent: -
      Resv style: 1 FF, Label in: 3, Label out: -
      Time left:  142, Since: Thu Oct 21 15:41:59 2004
      Tspec: rate 0bps size 0bps peak Infbps m 20 M 1500
      Port number: sender 2 receiver 39082 protocol 0
      PATH rcvfrom: 10.1.13.2 (so-0/0/2.0) 17 pkts
      Adspec: received MTU 1500 
      PATH sentto: localclient
      RESV rcvfrom: localclient 
       Record route: 10.1.36.2 10.1.13.2 <self>  
    Total 1 displayed,  Up 1 , Down 0
    
    Transit LSP: 0 sessions
    Total 0 displayed, Up 0, Down 0
    

    Sample Output 2

    user@R3> show mpls lsp extensive
    Ingress LSP: 0 sessions
    Total 0 displayed, Up 0, Down 0
    
    Egress LSP: 0 sessions
    Total 0 displayed, Up 0, Down 0
    
    Transit LSP: 2 sessions
    
    10.0.0.1
      From: 10.0.0.6, LSPstate: Up, ActiveRoute: 1
       LSPname: R6-to-R1 , LSPpath: Primary
      Suggested label received: -, Suggested label sent: -
      Recovery label received: -, Recovery label sent: 3
      Resv style: 1 FF, Label in: 100528, Label out: 3
      Time left:  125, Since: Thu Oct 21 15:29:26 2004
      Tspec: rate 0bps size 0bps peak Infbps m 20 M 1500
      Port number: sender 2 receiver 39082 protocol 0
      PATH rcvfrom: 10.1.36.2 (so-0/0/3.0) 17 pkts
      Adspec: received MTU 1500 sent MTU 1500
      PATH sentto: 10.1.13.1 (so-0/0/2.0) 17 pkts
      RESV rcvfrom: 10.1.13.1 (so-0/0/2.0) 17 pkts
      Explct route: 10.1.13.1 
      Record route: 10.1.36.2 <self> 10.1.13.1  
    
    10.0.0.6
      From: 10.0.0.1, LSPstate: Up, ActiveRoute: 1
       LSPname: R1-to-R6 , LSPpath: Primary
      Suggested label received: -, Suggested label sent: -
      Recovery label received: -, Recovery label sent: 3
      Resv style: 1 FF, Label in: 100544, Label out: 3
      Time left:  147, Since: Thu Oct 21 15:39:33 2004
      Tspec: rate 0bps size 0bps peak Infbps m 20 M 1500
      Port number: sender 1 receiver 47963 protocol 0
      PATH rcvfrom: 10.1.13.1 (so-0/0/2.0) 4 pkts
      Adspec: received MTU 1500 sent MTU 1500
      PATH sentto: 10.1.36.2 (so-0/0/3.0) 4 pkts
      RESV rcvfrom: 10.1.36.2 (so-0/0/3.0) 4 pkts
      Explct route: 10.1.36.2 
      Record route: 10.1.13.1 <self> 10.1.36.2  
    Total 2 displayed, Up 2, Down 0
    

    Sample Output 3

    user@R6> show mpls lsp extensive
    Ingress LSP: 1 sessions
    
    10.0.0.1
      From: 10.0.0.6, State: Up, ActiveRoute: 1,  LSPname: R6-to-R1
      ActivePath:  (primary)
      LoadBalance: Random
      Encoding type: Packet, Switching type: Packet, GPID: IPv4
     *Primary                    State: Up
        Computed ERO (S [L] denotes strict [loose] hops): (CSPF metric: 20)
      10.1.36.1 S 10.1.13.1 S  
        Received RRO (ProtectionFlag 1=Available 2=InUse 4=B/W 8=Node 10=SoftPreempt):
              10.1.36.1 10.1.13.1
       18 Oct 21 15:34:18 Selected as active path
       17 Oct 21 15:34:17 Record Route:  10.1.36.1 10.1.13.1
       16 Oct 21 15:34:17 Up
       15 Oct 21 15:34:17 Originate Call
       14 Oct 21 15:34:17 CSPF: computation result accepted
       [...Output truncated...]
      Created: Tue Oct 19 22:28:30 2004
    Total 1 displayed, Up 1, Down 0
    
    Egress LSP: 1 sessions
    
    10.0.0.6
      From: 10.0.0.1, LSPstate: Up, ActiveRoute: 0
       LSPname: R1-to-R6 , LSPpath: Primary
      Suggested label received: -, Suggested label sent: -
      Recovery label received: -, Recovery label sent: -
      Resv style: 1 FF, Label in: 3, Label out: -
      Time left:  126, Since: Thu Oct 21 15:44:25 2004
      Tspec: rate 0bps size 0bps peak Infbps m 20 M 1500
      Port number: sender 1 receiver 47963 protocol 0
      PATH rcvfrom: 10.1.36.1 (so-0/0/3.0) 4 pkts
      Adspec: received MTU 1500 
      PATH sentto: localclient
      RESV rcvfrom: localclient 
       Record route: 10.1.13.1 10.1.36.1 <self>  
    Total 1 displayed, Up 1, Down 0
    
    Transit LSP: 0 sessions
    Total 0 displayed, Up 0, Down 0
    

    Meaning

    Sample Outputs 1 and 3 from ingress router R1 and egress router R6 show that the LSP is now traversing the network along the expected path, from R1 through R3 to R6, and the reverse LSP, from R6 through R3 to R1. In addition, Sample Output 2 from transit router R3 shows that there are two transit LSP sessions, one from R1 to R6, and the other from R6 to R1.

    Published: 2013-07-25