TechLibrary

Table of Contents

Guide That Contains This Content

[+] Expand All

[-] Collapse All

Setting the Encapsulation Mode

To configure a DS interface on Circuit Emulation MICs with CESoPSN encapsulation at the provider edge (PE) router:

In configuration mode, go to the [edit interfaces ds-mpc-slot/mic-slot/port<:channel>] hierarchy level.
[edit]user@host# edit interfaces ds-mpc-slot/mic-slot/port<:channel>
For example:
[edit]user@host# edit interfaces ds-1/0/0:1:1:1
Configure CESoPSN as the encapsulation type and set the logical interface for the DS interface.
[edit interfaces ds-mpc-slot/mic-slot/port<:channel>]user@host# set encapsulation cesopsn unit logical-unit-number
For example:
[edit interfaces ds-1/0/0:1:1:1]user@host# set encapsulation cesopsn unit 0

To verify this configuration, use the show command at the [edit interfaces ds-1/0/0:1:1:1] hierarchy level:

[edit interfaces ds-1/0/0:1:1:1]user@host# showencapsulation cesopsn;unit 0;

You do not need to configure any circuit cross-connect family because it is automatically created for the CESoPSN encapsulation.