TechLibrary

Table of Contents

Guide That Contains This Content

[+] Expand All

[-] Collapse All

node-group (Resources)

node-group node-group-name {network-domain;node-device node-device-name;}

[edit fabric resources]

Statement introduced in Junos OS Release 11.3 for the QFX Series.

(QFabric systems only) Define Node groups within a QFabric system.

Note: The following rules apply to QFabric Node group naming:

The network Node group must use the predefined name NW-NG-0. You must use this name when adding Node devices to the network Node group. You cannot specify a different name. Also, you can configure only one network Node group per partition.
Node group names must use alphabetic (A through Z and a through z), numeric (0 through 9), or dash (-) characters.
The maximum length of a Node group name is 30 characters.
Node group names are case sensitive. For example, MY-NG-1 and my-ng-1 refer to different components.
You cannot use the reserved names all, fabric, or director-group as a Node group name.

The remaining statements are explained separately.

admin—To view this statement in the configuration.

admin-control—To add this statement to the configuration.