Related Documentation
- Detecting Gateway Controller Failures in Session Border Control Solutions Guide Using BGF and IMSG
maximum-inactivity-time
Syntax
Hierarchy Level
Release Information
Statement introduced in Junos OS Release 9.2.
maximum and minimum options introduced in Junos OS Release 9.5.
Description
Specify default, maximum, and minimum values for the maximum inactivity time. The default value is used if the gateway controller requests that the BGF detect the inactivity timeout event, but the gateway controller does not set a value for the maximum inactivity time. The maximum and minimum values are used to set limits for the maximum inactivity time set by the gateway controller. The BGF issues an error message if the value received from the gateway controller violates the configured minimum or maximum. If the BGF does not receive a message from the gateway controller before the maximum inactivity time expires, it sends a Notify message to the gateway controller. This timer resets each time the BGF receives a message from the gateway controller.
Options
default 10–millisecond-units—Default value for the maximum inactivity time.
Range: 100 through 65,535 (10-millisecond units)
Default: 12,000
maximum 10–millisecond-units—Maximum value for the maximum inactivity time.
Range: 100 through 65,535 (10-millisecond units)
Default: 12,000
minimum 10–millisecond-units—Minimum value for the maximum inactivity time.
Range: 100 through 65,535 (10-millisecond units)
Default: 12,000
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related Documentation
- Detecting Gateway Controller Failures in Session Border Control Solutions Guide Using BGF and IMSG
