Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

TechLibrary
Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    show synchronous-ethernet global-information

    Syntax

    show synchronous-ethernet global-information<brief>

    Release Information

    Command introduced in Junos OS Release 11.2R4 for MX80-T, MX5, MX10, MX40, MX240, MX480, and MX960 routers.

    Description

    (MX5, MX10, MX40, MX80, MX80-T, MX240, MX480, and MX960 routers only) Display information about the global configuration for Synchronous Ethernet chassis synchronization.

    Required Privilege Level

    maintenance

     

    Related Documentation

     

    List of Sample Output

    Output Fields

    Table 1 lists the output fields for the show synchronous-ethernet global-information command. Output fields are listed in the approximate order in which they appear.

    Table 1: show synchronous-ethernet global-information Output Fields

    Field Name

    Field Description

    Network option

    (option-1(EEC1) | option-2(EEC2))—Displays the network option configuration, either option-1(EEC1) or option-2(EEC2).

    Clock mode

    (free-run | auto-select)—Displays the configured mode of operation. The clock source can be either from the free-run local oscillator or from an external qualified clock. The default is auto-select mode.

    QL mode

    (enable | disable)—Displays the configured quality level mode configuration. The default is disable.

    Switchover mode

    (revertive | non-revertive)—Displays the configured synchronization clock switching mode. The default mode is revertive.

    Config change holdover

    seconds—Displays the time interval to wait before selecting the new clock source during a configuration change. The default value is 30 seconds.

    Switchover holdover

    seconds—Displays the time interval to wait before selecting the new clock source during switchover. The default value is 30 seconds.

    Reboot holdover

    seconds—Displays the time interval to wait before selecting the new clock source during reboot. The default value is 120 seconds.

    Sample Output

    user@host# show synchronous-ethernet global-information
    Global Configuration:

Network option         : option-1(EEC1)
Clock mode             : Auto-select
QL mode                : Disabled
Switchover mode        : Revertive
Config change holdover : 15  seconds
Switchover holdover    : 30  seconds
Reboot holdover        : 120 seconds

    Published: 2013-07-24

    Previous Page Next Page