show task replication

Syntax

Release Information

Command introduced in Junos OS Release 8.5.

Command introduced in Junos OS Release 9.0 for EX Series switches.

Command introduced in Junos OS Release 13.2X51-D20 for QFX Series switches.

Description

Displays nonstop active routing (NSR) status. When you issue this command on the master Routing Engine, the status of nonstop active routing synchronization is also displayed.

Options

This command has no options.

Required Privilege Level

view

List of Sample Output

show task replication (Issued on the Master Routing Engine)
show task replication (Issued on the Backup Routing Engine)

Output Fields

Table 3 lists the output fields for the show task replication command. Output fields are listed in the approximate order in which they appear.

Table 3: show task replication Output Fields

Field Name	Field Description
Stateful replication	Displays whether or not graceful Routing Engine switchover is configured. The status can be Enabled or Disabled.
RE mode	Displays the Routing Engine on which the command is issued: Master, Backup, or Not applicable (when the router has only one Routing Engine).
Protocol	Protocols that are supported by nonstop active routing.
Synchronization Status	Nonstop active routing synchronization status for the supported protocols. States are NotStarted, InProgress, and Complete.

Sample Output

show task replication (Issued on the Master Routing Engine)

user@host> show task replication

         Stateful Replication: Enabled
         RE mode: Master

     Protocol                Synchronization Status
     OSPF                    NotStarted
     BGP                     Complete
     IS-IS                   NotStarted
     LDP                     Complete
     PIM                     Complete

show task replication (Issued on the Backup Routing Engine)

user@host> show task replication

         Stateful Replication: Enabled
         RE mode: Backup