Diagnose a Suspected Circuit Problem
Purpose
When you suspect a circuit problem, it is important to work with the transport-layer engineer to resolve the problem. The transport-layer engineer may create a loop to the router from various points in the network. You can then perform tests to verify the connection from the router to that loopback in the network.
Action
After the transport-layer engineer has created the loop to the router from the network, you must verify the connection from the router to the loopback in the network. Follow Step 2 through Step 8 in Diagnose a Suspected Hardware Problem with a Fast Ethernet or Gigabit Ethernet Interface. Keep in mind that any problems encountered in the test indicate a problem with the connection from the router to the loopback in the network.
By performing tests to loopbacks at various points in the network, you can isolate the source of the problem.
