Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Related Documentation
- MX Series
- clear oam ethernet connectivity-fault-management continuity-measurement
- PTX Series
- clear oam ethernet connectivity-fault-management continuity-measurement
- Additional Information
- Junos® OS Ethernet Interfaces
Clearing Continuity Measurement Statistics
Purpose
Clear the continuity measurement statistics
By default, statistics are deleted for all MEPs attached to CFM-enabled interfaces on the router. However, you can filter the scope of the command by specifying an interface name.
Action
- To clear the continuity measurement statistics for all
MEPs attached to CFM-enabled interfaces on the router:
user@host> clear oam ethernet connectivity-fault-management continuity-measurement maintenance-domain md-name maintenance-association ma-name local-mep local-mep-id remote-mep remote-mep-id
Related Documentation
- MX Series
- clear oam ethernet connectivity-fault-management continuity-measurement
- PTX Series
- clear oam ethernet connectivity-fault-management continuity-measurement
- Additional Information
- Junos® OS Ethernet Interfaces
