Monitoring Interfaces That Have CoS Components
Purpose
Use the monitoring functionality to display details about the physical and logical interfaces and the CoS components assigned to them.
Action
To monitor interfaces that have CoS components in the CLI, enter the command:
user@switch> show class-of-service interface
To monitor a specific interface in the CLI, enter the command:
user@switch> show class-of-service interface interface-name
Meaning
Table 1 summarizes key output fields for CoS interfaces.
Table 1: Summary of Key CoS Interfaces Output Fields
Field | Values |
|---|---|
Physical interface | Name of a physical interface to which CoS components are assigned. |
Index | Index of this interface or the internal index of a specific object. |
Queues supported | Number of queues you can configure on the interface. |
Queues in use | Number of queues currently configured. |
Scheduler map | Name of the scheduler map associated with this interface. |
Congestion-notification | Status of congestion notification (enabled or disabled). |
Rewrite Input IEEE Code-point | (Fibre Channel NP_Port interfaces only) IEEE 802.1p code point (priority) the interface assigns to incoming Fibre Channel (FC) traffic when the interface encapsulates the FC traffic in Ethernet before forwarding it onto the FCoE network. |
Logical Interface | Name of a logical interface on the physical interface to which CoS components are assigned. |
Object | Category of an object—for example, classifier, scheduler-map, or rewrite. |
Name | Name of the object—for example, ba-classifier. |
Type | Type of the object—for example, ieee8021p for a classifier. |
