Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Related Documentation
- ACX Series
- Investigating Interface Steps and Commands Overview
- Monitoring Interfaces
- Performing a Loopback Test on an Interface
- M Series
- Investigating Interface Steps and Commands Overview
- Monitoring Interfaces
- Performing a Loopback Test on an Interface
- MX Series
- Investigating Interface Steps and Commands Overview
- Monitoring Interfaces
- Performing a Loopback Test on an Interface
- T Series
- Investigating Interface Steps and Commands Overview
- Monitoring Interfaces
- Performing a Loopback Test on an Interface
Locating Interface Alarms
Problem
Locating alarms and errors for the media can be a simple process.
Solution
To locate interface alarms and errors, use the show interfaces interface-name extensive command and examine the output for active alarms and defects.
Related Documentation
- ACX Series
- Investigating Interface Steps and Commands Overview
- Monitoring Interfaces
- Performing a Loopback Test on an Interface
- M Series
- Investigating Interface Steps and Commands Overview
- Monitoring Interfaces
- Performing a Loopback Test on an Interface
- MX Series
- Investigating Interface Steps and Commands Overview
- Monitoring Interfaces
- Performing a Loopback Test on an Interface
- T Series
- Investigating Interface Steps and Commands Overview
- Monitoring Interfaces
- Performing a Loopback Test on an Interface
