Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Clear the NVRAM Contents
Purpose
Currently the storage area for the logs on the NVRAM is limited to 4 KB. You need to delete old NVRAM logs to make room for new ones.
Action
To clear the content of the NVRAM after you have captured the necessary information, follow these steps:
- Exit from the CLI environment and create a UNIX-level
shell by entering the start shell command:user@host> start shell
- Type su and the root password when prompted. You are now in
the shell and the prompt is % instead of >, for
example: % su Password: ****
- Establish a vty session to the appropriate
component. Use the vty command followed by the abbreviation for the component,
for example:root@host% vty sfm0 SFM3(host vty)# FPC1(host vty)#
- Type the clear nvram command, for example:SFM3(host vty)# clear nvram FPC1(host vty)# clear nvram
