TechLibrary

Table of Contents

Guide That Contains This Content

[+] Expand All

[-] Collapse All

Configuring a Subscriber Interface with a Static VLAN Interface

This topic describes how to configure a subscriber interface with a static VLAN interface.

After you configure the static VLAN interface, you can reference it in a dynamic profile.

To configure a subscriber interface over a VLAN:

Configure the static VLAN interface and enable VLAN tagging.
[edit interfaces]
ge-5/0/0 {vlan-tagging;}
Configure the units and assign the VLAN IDs.
unit 1 {proxy-arp;vlan-id 1;family inet {unnumbered-address lo0.0 preferred-source-address 192.1.1.1;}}
unit 2 {proxy-arp;vlan-id 2;family inet {unnumbered-address lo0.0 preferred-source-address 192.1.1.1;}}
Associate the static subscriber interface in a dynamic profile.
See Associating Dynamic Profiles with Statically Created Interfaces.