Managing System Processes in the Routing Matrix with a TX Matrix Router
Some system processes in a routing matrix with a TX Matrix router run on the TX Matrix router and some run on the T640 routers. For example, the routing protocol process (rpd) runs exclusively on the TX Matrix router. To restart the routing protocol process for the entire routing matrix, issue the restart routing command on the TX Matrix router.
user@router> restart routing ? Possible completions: <[Enter]> Execute this command gracefully Gracefully restart the process immediately Immediately restart (SIGKILL) the process logical-system Name of logical system soft Soft reset (SIGHUP) the process | Pipe through a command
Other processes run on both the TX Matrix router and the T640 routers. To restart the chassis process that manages PICs, FPCs, and other hardware components, issue the restart chassis-control command on the TX Matrix router and select the all, all-lcc, or lcc lcc-number option.
user@router> restart chassis-control ? Possible completions: <[Enter]> Execute this command all Restart software process on all chassis
all-lcc Restart software process on all LCC chassis gracefully Gracefully restart the process immediately Immediately restart (SIGKILL) the process lcc Restart software process on specific chassis (0..3) soft Soft reset (SIGHUP) the process | Pipe through a command
To restart the Simple Network Management Protocol (SNMP) process, issue the restart snmp command on the TX Matrix router and select the all, all-lcc, or lcc lcc-number option.
user@router> restart snmp ?
Possible completions: <[Enter]> Execute this command all Restart software process on all chassis all-lcc Restart software process on all LCC chassis gracefully Gracefully restart the process immediately Immediately restart (SIGKILL) the process lcc Restart software process on specific chassis (0..3) soft Soft reset (SIGHUP) the process | Pipe through a command
