Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Configuring Loopback Interfaces for the DHCPv6 Layer 3 Wholesale Solution
You must configure loopback interfaces for use in the subscriber management access network. The loopback interfaces are automatically used for unnumbered interfaces.
To configure loopback interfaces:
- Edit the loopback interface.[edit]user@host# edit interfaces lo0
- Edit the unit for the loopback interface that you want
to use for the wholesaler.[edit interfaces lo0]user@host# edit unit 0
- Edit the loopback interface family that belongs to the
wholesaler.[edit interfaces lo0 unit 0]user@host# edit family inet6
- Specify the wholesale loopback interface address.[edit interfaces lo0 unit 0]user@host# set address 2002:2c28:2c21::1/128
- Edit the unit for a retail loopback interface.[edit interfaces lo0]user@host# edit unit 1
- Edit the retail loopback interface family.[edit interfaces lo0 unit 1]user@host# edit family inet6
- Specify the retail loopback interface address.[edit interfaces lo0 unit 1]user@host# set address 2002:2c2c:2c21::1/128
- Repeat steps 5 through 7 for additional retailers, making sure to use unique unit and address values for each retailer loopback interface.
