Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Configuring the Time Zone
To configure the time zone on the JCS management module:
- Log in to the JCS management module.
- Use the env command to set JCS management module
1 (mm[1]) as the configuration target. For example:
system> env —T mm[1] - Use the clock command to configure the time zone. For example:
system:mm[1]> clock —g —8 —dst ucIn this example, the clock is configured for 8 hours earlier than UTC (GMT) (-g -8), and daylight saving time for the USA and Canada (-dst uc) is set.
