Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

TechLibrary
Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring a Three-Color Layer 2 Policer for the Pseudowire

    For the basic configuration of Layer 2 policers for pseudowires, create a three-color policer. This scenario shows a two-rate three-color-marking (trTCM) policer.

    To configure a three-color policer:

    1. Create a three-color policer.
      [edit firewall] user@host# edit three-color-policer trTCM-policer
    2. Specify that the policer is to be used on a logical interface.
      [edit firewall three-color-policer trTCM-policer]user@host# set logical-interface-policer
    3. Set the action for the policer.
      [edit firewall three-color-policer trTCM-policer]user@host# set action loss-priority high then discard
    4. Specify that the policer is a two-rate policer and configure the policer.
      [edit firewall three-color-policer trTCM-policer]user@host# edit two-rateuser@host# set color-aware user@host# set committed-information-rate 10m user@host# set committed-burst-size 50muser@host# set committed-burst-size 150k user@host# set peak-information-rate 50muser@host# set peak-burst-size 450k
     

    Related Documentation

     

    Published: 2013-02-13

    Previous Page Next Page