Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Related Documentation
- M Series
- Routing Instances Overview
- Layer 2 Routing Instance Types
- Layer 2 Routing Instances Configuration Hierarchy
- MX Series
- Routing Instances Overview
- Layer 2 Routing Instance Types
- Layer 2 Routing Instances Configuration Hierarchy
- Configuring a Virtual Switch Routing Instance
- Configuring a Layer 2 Control Protocol Routing Instance
Configuring a VPLS Routing Instance
Use the vpls routing instance type for point-to-multipoint LAN implementations between a set of sites in a VPN.
To create a routing instance for VPLS, include at least the following statements in the configuration:
routing-instances {routing-instance-name {instance-type vpls;interface interface-name;route-distinguisher (as-number:number | ip-address:number);vrf-import [ policy-names ];vrf-export [ policy-names ];protocols {vpls {... vpls configuration ...}}}}
You can include these statements at the following hierarchy levels:
- [edit]
- [edit logical-systems logical-system-name]
For more information about configuring VPLS, see the Junos OS VPNs Configuration Guide. For a detailed VPLS example configuration, see the Junos OS Feature Guides.
Related Documentation
- M Series
- Routing Instances Overview
- Layer 2 Routing Instance Types
- Layer 2 Routing Instances Configuration Hierarchy
- MX Series
- Routing Instances Overview
- Layer 2 Routing Instance Types
- Layer 2 Routing Instances Configuration Hierarchy
- Configuring a Virtual Switch Routing Instance
- Configuring a Layer 2 Control Protocol Routing Instance
