Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Configuring the JSRC Partition
JSRC works within a specific logical system:routing instance context, called a partition.
 | Note: Currently, only a single partition is supported; you must configure it within the default logical system:routing instance context. |
Before you configure the JSRC partition, perform the following task:
- Configure the Diameter instance at the [edit diameter] hierarchy level. See Configuring Diameter.
Configuration for the JSRC partition consists of naming the partition and then associating a Diameter instance, the SAE hostname, and the SAE realm with the partition.
To configure the JSRC partition:
- Create the partition.[edit jsrc]user@host# set partition partition1
- Specify the Diameter instance for the JSRC partition.
Note: Currently, only the default Diameter instance, master, is supported.
[edit jsrc partition partition1]user@host# set diameter-instance master - Configure the destination host for the JSRC partition.[edit jsrc partition partition1]user@host# set destination-host sae1
- Configure the destination realm for the JSRC partition.[edit jsrc partition partition1]user@host# set destination-realm generic.example.com
