Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Configuring NNI ISP-Facing Interfaces for the Layer 2 Wholesale Solution
You must configure separate, ISP-facing interfaces on each NNI ISP-facing router that connect to individual retailer ISP access routers in the Layer 2 Wholesale solution.
To configure an NNI ISP-facing interface:
- Access the physical interface that you want to use to
access the retailer ISP network.[edit interfaces]user@host# edit interfaces ge-1/1/0
- Specify the encapsulation type for the VLAN interfaces.[edit interfaces ge-1/1/0]user@host# edit encapsulation ethernet-vpls
- Specify the interface unit that you want ISP clients to
use.[edit interfaces ge-1/1/0]user@host# edit unit 0
- Repeat these steps for any other NNI ISP-facing interfaces that you want to use. In this example, you must also configure interface ge-2/2/0.0.
