Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Related Documentation
- ACX Series
- Overview of BA Classifier Types
- M Series
- Overview of BA Classifier Types
- Default Behavior Aggregate Classification Overview
- MX Series
- For hardware requirements and configuration guidelines, see Guidelines for Configuring Dynamic CoS for Subscriber Access
- Example: Configuring Dynamic Hierarchical Scheduling and Queuing for Subscriber Access
- Verifying the Scheduling and Shaping Configuration for Subscriber Access
- Applying a Rewrite Rule Definition to a Subscriber Interface in a Dynamic Profile
- Overview of BA Classifier Types
- Default Behavior Aggregate Classification Overview
- PTX Series
- Overview of BA Classifier Types
- Default Behavior Aggregate Classification Overview
- T Series
- Overview of BA Classifier Types
- Default Behavior Aggregate Classification Overview
Applying a Classifier to a Subscriber Interface in a Dynamic Profile
You can apply the classification map to a subscriber interface in a dynamic profile.
For dynamic CoS, you define the classification map for the CoS values statically, then reference the classifier configuration in the dynamic profile for the subscriber interface.
To apply a classifier to an interface in a dynamic profile:
- Define the classifier.
The available classifier types for dynamic CoS are dscp, dscp-ipv6, ieee-802.1, and inet-precedence.
See Defining Classifiers.
- Apply the classifier definition to the subscriber interface
in the dynamic profile.[edit dynamic-profiles profile-name class-of-service interfaces interface-name unit logical-unit-number]user@host# edit classifiers
- Configure the applicable classifiers in the dynamic profile.
- For DSCP:[edit dynamic-profiles profile-name class-of-service interfaces interface-name unit logical-unit-number classifiers]user@host# set dscp (classifier-name | default)
- For DSCPv6:[edit dynamic-profiles profile-name class-of-service interfaces interface-name unit logical-unit-number classifiers]user@host# set dscp-ipv6 (classifier-name | default)
- For IEEE 802.1:[edit dynamic-profiles profile-name class-of-service interfaces interface-name unit logical-unit-number classifiers]user@host# set ieee-802.1 (classifier-name | default) vlan-tag (inner | outer)
- For inet-precedence:[edit dynamic-profiles profile-name class-of-service interfaces interface-name unit logical-unit-number classifiers]user@host# set inet-precedence (classifier-name | default)
- For DSCP:
Related Documentation
- ACX Series
- Overview of BA Classifier Types
- M Series
- Overview of BA Classifier Types
- Default Behavior Aggregate Classification Overview
- MX Series
- For hardware requirements and configuration guidelines, see Guidelines for Configuring Dynamic CoS for Subscriber Access
- Example: Configuring Dynamic Hierarchical Scheduling and Queuing for Subscriber Access
- Verifying the Scheduling and Shaping Configuration for Subscriber Access
- Applying a Rewrite Rule Definition to a Subscriber Interface in a Dynamic Profile
- Overview of BA Classifier Types
- Default Behavior Aggregate Classification Overview
- PTX Series
- Overview of BA Classifier Types
- Default Behavior Aggregate Classification Overview
- T Series
- Overview of BA Classifier Types
- Default Behavior Aggregate Classification Overview
