TechLibrary

Table of Contents

Guide That Contains This Content

[+] Expand All

[-] Collapse All

Configuring a Dynamic Shaping-Rate Adjustment for Queues

To configure adjustment parameters for a queue in a dynamic profile:

Configure the percentage of adjustment for the shaping rate.
[edit dynamic-profiles profile-name class-of-service schedulers scheduler-name]user@host# set adjust-percent percentage
Configure the minimum adjusted value for the shaping rate.
Do one of the following:
- Configure the minimum adjusted value for the queue.
  [edit dynamic-profiles profile-name class-of-service schedulers scheduler-name]user@host# set adjust-minimum (rate | $junos-cos-adjust-minimum)
- Configure the minimum adjusted value for the node.
  [edit dynamic-profiles profile-name class-of-service traffic-control-profile profile-name]user@host# set adjust-minimum rate
Best Practice: Ensure that the minimum adjusted value that you configure does not exceed the shaping rate and is not lower than the configured transmit rate.