Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
System Requirements
To implement IPSec, your system must meet these minimum requirements:
- Junos OS Release 8.5 or later for automatic reenrollment of digital certificates.
- Junos OS Release 8.3 or later for IPSec support on OSPF version 2
- Junos OS Release 8.2 or later for support on M120 routers
- Junos OS Release 8.1 or later for IPSec IKE support in routing instances, and certificate revocation list support on AS and MultiServices PICs installed on M Series and T Series routers
- Junos OS Release 7.6 or later for AES encryption and SHA-256 authentication support on AS PICs installed in M Series routers, and IPv6-based IPSec for AS PICs installed in M Series and T Series routers
- Junos OS Release 7.5 or later for digital certificate support on AS PICs installed in M Series and T Series routers, and support of the IPSec Monitoring Management Information Base (MIB)
- Junos OS Release 7.4 or later for dynamic endpoint tunneling support and configuring multiple routed tunnels in a single next-hop service set
- Junos OS Release 7.2 or later for transport mode IPSec on Routing Engines running OSPF version 3 and support for the AS II FIPS PIC
- Junos OS Release 7.1 or later for IPSec on the ES PIC for T Series and M320 routers
- Junos OS Release 6.4 or later for IPSec on the AS PIC for T Series and M320 routers
- Junos OS Release 6.2 or later for IPSec on the AS PIC for M Series routers
- Junos OS Release 5.7 or later for multicast over IPSec tunnels on M Series routers
- Junos OS Release 5.2 or later for IPSec on the ES PIC for M Series routers
- Two Juniper Networks M Series or T Series routers
- Two ES PICs or AS PICs for M Series and T Series routers
