$junos-framed-route-distance

Distance of an access route. You specify this variable at the [edit dynamic-profiles profile-name routing-options access route address] hierarchy level for the preference statement.

$junos-framed-route-ipv6-address-prefix

IPv6 route prefix of an access route. You specify this variable at the [edit dynamic-profiles profile-name routing-options access] hierarchy level for the route statement.

$junos-framed-route-nexthop

Next-hop address of an access route. You specify this variable at the [edit dynamic-profiles profile-name routing-options access route address] hierarchy level for the next-hop statement.

$junos-interface-name

Logical interface of an access-internal route. DHCP or PPP supplies this information when the subscriber logs in. You specify this variable at the [edit dynamic-profiles profile-name routing-options access-internal route address] hierarchy level for the qualified-next-hop statement.

This variable is also used for creating dynamic IP demux interfaces.

$junos-subscriber-mac-address

MAC address for a subscriber identified in an access-internal route. You specify this variable at the [edit dynamic-profiles profile-name routing-options access-internal route address qualified-next hop underlying-interface] hierarchy level for the mac-address statement.

$junos-igmp-access-group-name

Specifies the access list to use for the source (S) filter.

$junos-igmp-enable

Ensures that IGMP is not disabled on the interface by an AAA-based authentication and management method (for example, RADIUS). You specify this variable at the [dynamic-profiles profile-name protocols igmp] hierarchy level for the interface statement.

$junos-igmp-version

IGMP version configured in a client access profile. Junos OS obtains this information from the RADIUS server when a subscriber accesses the router. The version is applied to the accessing subscriber when the profile is instantiated. You specify this variable at the [dynamic-profiles profile-name protocols igmp] hierarchy level for the interface statement.

$junos-ipv6-ndra-prefix

Prefix value for the router advertisement interface. Junos OS obtains this information from the RADIUS server when a subscriber accesses the router. The prefix value is applied to the accessing subscriber when the profile is instantiated. You specify this variable at the [dynamic-profiles profile-name protocols router-advertisement interface $junos-interface-name] hierarchy level.

$junos-mld-access-source-group-name

Specifies the access list to use for the source-group (S,G) filter.

$junos-mld-immediate-leave

Enables MLD immediate leave on the interface. You specify this variable at the [dynamic-profiles profile-name protocols mld] hierarchy level for the interface statement.

$junos-cos-byte-adjust

Byte adjustment value configured in a traffic-control profile in a dynamic profile. Junos OS obtains this information from the RADIUS server when a subscriber authenticates over the static or dynamic subscriber interface to which the dynamic profile is attached.

You reference this variable in the bytes option with the overhead-accounting statement at the [edit dynamic-profiles profile-name class-of-service traffic-control-profiles profile-name] hierarchy level.

$junos-cos-excess-rate

Excess rate configured in a traffic-control profile in a dynamic profile. Junos OS obtains this information from the RADIUS server when a subscriber authenticates over the static or dynamic subscriber interface to which the dynamic profile is attached.

You reference this variable in the excess-rate statement at the [edit dynamic-profiles profile-name class-of-service traffic-control-profiles profile-name] hierarchy level.

$junos-cos-excess-rate-low

Rate configured for excesslow-priority traffic in a traffic-control profile in a dynamic profile for subscriber access. Junos OS obtains this information from the RADIUS server when a subscriber authenticates over the static or dynamic subscriber interface to which the dynamic profile is attached.

You reference this variable in the excess-rate-low statement at the [edit dynamic-profiles profile-name class-of-service traffic-control-profiles profile-name] hierarchy level.

$junos-cos-guaranteed-rate-burst

Burst size for the guaranteed rate that is configured in a traffic-control profile in a dynamic profile. Junos OS obtains this information from the RADIUS server when a subscriber authenticates over the static or dynamic subscriber interface to which the dynamic profile is attached.

You reference this variable with the burst-size option in the guaranteed-rate statement at the [edit dynamic-profiles profile-name class-of-service traffic-control-profiles profile-name] hierarchy level.

$junos-cos-shaping-mode

Shaping mode configured in a traffic-control profile in a dynamic profile. Junos OS obtains this information from the RADIUS server when a subscriber authenticates over the static or dynamic subscriber interface to which the dynamic profile is attached.

You reference this variable in the overhead-accounting statement at the [edit dynamic-profiles profile-name class-of-service traffic-control-profiles profile-name] hierarchy level.

$junos-cos-shaping-rate-burst

Burst size for the shaping rate configured in a traffic-control profile in a dynamic profile. Junos OS obtains this information from the RADIUS server when a subscriber authenticates over the static or dynamic subscriber interface to which the dynamic profile is attached.

You reference this variable with the burst-size option in the shaping-rate statement at the [edit dynamic-profiles profile-name class-of-service traffic-control-profiles profile-name] hierarchy level.

$junos-cos-scheduler-bs

Buffer size as a percentage of total buffer, specified for a scheduler configured in a dynamic profile. Junos OS obtains this information from the RADIUS server when a subscriber authenticates over the static or dynamic subscriber interface to which the dynamic profile is attached.

You reference this variable in the buffer-size statement with the percent option at the [edit dynamic-profiles profile-name class-of-service schedulers scheduler-name] hierarchy level.

$junos-cos-scheduler-dropfile-any

Name of the drop profile for random early detection (RED) for loss-priority level any specified for a scheduler configured in a dynamic profile. Junos OS obtains this information from the RADIUS server when a subscriber authenticates over the static or dynamic subscriber interface to which the dynamic profile is attached.

You reference this variable in the drop-profile statement at the [edit dynamic-profiles profile-name class-of-service schedulers scheduler-name drop-profile-map loss-priority any protocol any] hierarchy level.

NOTE: The drop profile must be configured statically (at the [edit class-of-service drop-profiles] hierarchy level).

$junos-cos-scheduler-dropfile-low

Name of the drop profile for random early detection (RED) for loss-priority level low specified for a scheduler configured in a dynamic profile. Junos OS obtains this information from the RADIUS server when a subscriber authenticates over the static or dynamic subscriber interface to which the dynamic profile is attached.

You reference this variable in the drop-profile statement at the [edit dynamic-profiles profile-name class-of-service schedulers scheduler-name drop-profile-map loss-priority low protocol any] hierarchy level.

NOTE: The drop profile must be configured statically (at the [edit class-of-service drop-profiles] hierarchy level) for loss-priority low.

$junos-cos-scheduler-dropfile-medium-low

Name of the drop profile for random early detection (RED) for loss-priority level medium-low specified for a scheduler configured in a dynamic profile. Junos OS obtains this information from the RADIUS server when a subscriber authenticates over the static or dynamic subscriber interface to which the dynamic profile is attached.

You reference this variable in the drop-profile statement at the [edit dynamic-profiles profile-name class-of-service schedulers scheduler-name drop-profile-map loss-priority medium-low protocol any] hierarchy level.

NOTE: The drop profile must be configured statically (at the [edit class-of-service drop-profiles] hierarchy level).

$junos-cos-scheduler-excess-rate

Value of the excess rate specified for a scheduler configured in a dynamic profile. Junos OS obtains this information from the RADIUS server when a subscriber authenticates over the static or dynamic subscriber interface to which the dynamic profile is attached.

You reference this variable in the excess-rate statement at the [edit dynamic-profiles profile-name class-of-service schedulers scheduler-name] hierarchy level.

$junos-cos-scheduler-tx

Transmit rate specified for a scheduler configured in a dynamic profile. Junos OS obtains this information from the RADIUS server when a subscriber authenticates over the static or dynamic subscriber interface to which the dynamic profile is attached.

You reference this variable in the transmit-rate statement at the [edit dynamic-profiles profile-name class-of-service schedulers scheduler-name] hierarchy level.

$junos-action-profile

Name of the action profile configured in a dynamic profile.

$junos-loss-threshold

The number of continuity check messages lost before marking the remote MEP as down, configured in a dynamic profile.

$junos-md-name-format

Name of the maintenance domain format configured in a dynamic profile.

$junos-md-level

Value of ’Level’, configured in a dynamic profile.

$junos-mep-id

The ’MEP’ value configured in the dynamic profile.

$junos-input-ipv6-filter

Attaches a filter based on RADIUS VSA 26-106 (IPv6-Ingress-Policy-Name) to the interface.

$junos-output-ipv6-filter

Attaches a filter based on RADIUS VSA 26-107 (IPv6-Egress-Policy-Name) to the interface.

$junos-interface-ifd-name

Name of the device to which the subscriber access client connects. All interfaces are created on this device. Its primary use is in creating single or multiple subscribers on a statically created interface. You specify this variable at the [dynamic-profiles profile-name interfaces] hierarchy level.

When creating a logical underlying interface for a dynamic VLAN demux interface, you must also specify this variable at the [dynamic-profiles profile-name interfaces demux0 unit $junos-interface-unit demux-options underlying-interface] hierarchy level.

$junos-ipv6-address

Selects the IPv6 address of the interface the subscriber uses. You specify this variable at the [edit dynamic-profiles profile-name interfaces interface-name unit logical-unit-number family family], [edit dynamic-profiles profile-name interfaces demux0 unit logical-unit-number family family], [edit dynamic-profiles profile-name interfaces pp0 unit “$junos-interface-unit” family family], and [edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number family family] hierarchy level for the address statement.

$junos-preferred-source-address

Selects the preferred source address associated with the loopback address used for the subscriber. You specify this variable at the [dynamic profiles profile-name interfaces demux0 unit "$junos-interface-unit" family inet unnumbered-address “$junos-loopback-interface”] hierarchy level for the preferred-source-address statement.

$junos-subscriber-ipv6-address

IPv6 address for subscriber. You specify this variable at the [dynamic-profiles profile-name interfaces interface-name unit logical-unit-number family inet6 demux-source] hierarchy level.

$junos-underlying-interface

Creates a logical underlying interface for a dynamic IP demux interface. The client logs in on this interface. You specify this variable at the [dynamic profiles profile-name interfaces demux0 unit "$junos-interface-unit" demux-options] hierarchy level for the underlying-interface statement.

When configured, the underlying interface is used to determine the $junos-underlying-interface, $junos-underlying-interface-unit, and $junos-ifd-name variables. For example, if the receiving logical interface is ge-0/0/0.1, the $junos-underlying-interface variable is set to ge-0/0/0 and the $junos-underlying-interface-unit variable is set to 1.

This variable is also used for creating access-internal routes.

$junos-interface-ifd-name

Name of the device to which the subscriber access client connects. All interfaces are created on this device. Its primary use is in creating single or multiple subscribers on a statically created interface. You specify this variable at the [dynamic-profiles profile-name interfaces] hierarchy level.

$junos-underlying-interface

Specifies the name of the underlying Ethernet interface on which the router dynamically creates the PPPoE logical interface. The $junos-underlying-interface predefined variable is dynamically replaced with the name of the underlying interface supplied by the network when the PPPoE subscriber logs in. You specify this variable at the [edit dynamic-profiles profile-name interfaces pp0 unit “$junos-interface-unit” pppoe-options] hierarchy level for the underlying-interface statement.

$junos-interface-set-name

Name of an interface set configured in a dynamic profile. To represent the name of a dynamically created agent circuit identifier (ACI) interface set, use the $junos-interface-set-name predefined variable in the interface-set statement at the [edit dynamic-profiles profile-name interfaces] hierarchy level.

$junos-routing-instance

Name of the routing instance to which the subscriber is assigned. This variable triggers a return value from the RADIUS server for Virtual-Router (VSA 26–1).

You reference this variable in the statement at the [dynamic-profiles profile-name] hierarchy level for the routing-instance statement.