Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Related Documentation
- EX Series
- Example: Configuring MPLS on EX Series Switches
- Configuring MPLS on Provider Edge Switches Using Circuit Cross-Connect (CLI Procedure)
- Configuring MPLS on Provider Edge Switches Using IP Over MPLS (CLI Procedure)
- Configuring MPLS on Provider Switches (CLI Procedure)
- Configuring an OSPF Network (J-Web Procedure)
traffic-engineering
Syntax
traffic-engineering;
Hierarchy Level
[edit protocols ospf | isis]
Release Information
Statement introduced in Junos OS Release 9.5 for EX Series switches.
Description
Enable the traffic engineering features of the specified routing protocol.
Default
Traffic engineering is disabled.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related Documentation
- EX Series
- Example: Configuring MPLS on EX Series Switches
- Configuring MPLS on Provider Edge Switches Using Circuit Cross-Connect (CLI Procedure)
- Configuring MPLS on Provider Edge Switches Using IP Over MPLS (CLI Procedure)
- Configuring MPLS on Provider Switches (CLI Procedure)
- Configuring an OSPF Network (J-Web Procedure)
