TechLibrary

Navigation

Table of Contents

Guide That Contains This Content

[+] Expand All

[-] Collapse All

rule (IP Reassembly)

Syntax

rule rule-name {match-direction direction;}

Hierarchy Level

[edit services ip-reassembly]

Release Information

Statement introduced in Junos OS Release 13.1.

Description

Configure an IP reassembly rule, which is used for inline IP reassembly on the inline services interface. The IP reassembly rule can be attached to a service set to indicate that the service set is of type IP reassembly. For inline IP reassembly, each rule must include the match-direction statement, which specifies the direction in which the match is applied.

Note: If you configure an IP reassembly rule, then you must configure the match-direction statement.

Options

rule-name

—

Name of the IP reassembly rule.

Range: Up to 63 characters

The remaining statement is explained separately.

Note: To create more than one IP reassembly rule, include the rule statement multiple times.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.