Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Related Documentation
- EX Series
- Example: Configuring MPLS on EX Series Switches
- Configuring MPLS on Provider Edge Switches Using Circuit Cross-Connect (CLI Procedure)
- Configuring MPLS on Provider Edge Switches Using IP Over MPLS (CLI Procedure)
- Configuring MPLS on Provider Switches (CLI Procedure)
- M Series
- Minimum RSVP Configuration
- PTX Series
- Minimum RSVP Configuration
- T Series
- Minimum RSVP Configuration
rsvp
Syntax
rsvp;
Hierarchy Level
[edit logical-systems logical-system-name protocols],[edit protocols]
Release Information
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.5 for EX Series switches.
Description
Enable Resource Reservation Protocol (RSVP) signaling.
You must include the rsvp statement in the configuration to enable RSVP on the router.
The primary purpose of RSVP in Junos OS for EX Series switches is to support dynamic signaling within label switched paths (LSPs).
Default
RSVP is disabled.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related Documentation
- EX Series
- Example: Configuring MPLS on EX Series Switches
- Configuring MPLS on Provider Edge Switches Using Circuit Cross-Connect (CLI Procedure)
- Configuring MPLS on Provider Edge Switches Using IP Over MPLS (CLI Procedure)
- Configuring MPLS on Provider Switches (CLI Procedure)
- M Series
- Minimum RSVP Configuration
- PTX Series
- Minimum RSVP Configuration
- T Series
- Minimum RSVP Configuration
