Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Related Documentation
- Configuring Rate Limiting for the BGF in Session Border Control Solutions Guide Using BGF and IMSG
peak-data-rate (All Streams)
Syntax
peak-data-rate {default bytes-per-second;maximum bytes-per-second;minimum bytes-per-second;}
Hierarchy Level
[edit services services pgcp gateway gateway-name h248-properties traffic-management]
Release Information
Statement introduced in Junos OS Release 9.2.
maximum and minimum options introduced in Junos OS Release 9.5.
Description
Configure the peak data rate for gate streams of any protocol.
Default
The BGF uses the default value of 10,000 bytes per second if the Policy command in H.248 messages is ON and both of the following apply:
- The peak data rate is not set in the H.248 message.
- There is no CLI configuration for peak data rate.
Options
default bytes-per-second—Default peak data rate.
Range: 125 through 4,294,967,295
maximum bytes-per-second—Maximum peak data rate.
Range: 125 through 4,294,967,295
minimum bytes-per-second—Minimum peak data rate.
Range: 125 through 4,294,967,295
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related Documentation
- Configuring Rate Limiting for the BGF in Session Border Control Solutions Guide Using BGF and IMSG
