TechLibrary

Table of Contents

Guide That Contains This Content

[+] Expand All

[-] Collapse All

mpls

Syntax

mpls {disable;class-of-service cos-value;no-cspf;no-decrement-ttl; advertisement-hold-time seconds;explicit-null;icmp-tunneling;interface (interface-name | all) {disable;}ipv6-tunneling;no-propagate-ttl;path path-name {(address | hostname) <loose | strict>;}label-switched-path lsp-name {disable;auto-bandwidth {adjust-interval seconds;adjust-threshold percentage;adjust-threshold-overflow-limit count;adjust-threshold-underflow-limitmaximum-bandwidth bps;minimum-bandwidth bps;monitor-bandwidth;}description text-string;from address;install destination-prefix</prefix-length> <active>;ldp-tunneling;no-cspf;no-decrement-ttl;primary path-name {adaptive;select (manual | unconditional);}secondary path-name {adaptive;select (manual | unconditional);}to address;traceoptions {file filename <files number> <size maximum-file-size> <world-readable | no-world-readable>;flag flag;}}static-label-switched-path lsp-name {bypass bypass-name {description text-string;next-hop (address | interface-name | address/interface-name);to address;}ingress {description string;install {destination-prefix <active>;}link-protection bypass-name name;next-hop (address | interface-name | address/interface-name);to address;}transit incoming-label {bandwidth bps;description text-string;link-protection bypass-name name;next-hop (address | interface-name | address/interface-name);pop;swap out-label;}statistics {auto-bandwidth;file filename <files number> <size maximum-file-size> <world-readable | no-world-readable>;interval seconds;}traceoptions {file filename <files number> <size maximum-file-size> <world-readable | no-world-readable>;flag flag;}traffic-engineering (bgp | bgp-igp);}}

Hierarchy Level

[edit protocols]

Release Information

Statement introduced in Junos OS Release 9.5 for EX Series switches.

Description

Enable MPLS on the switch.

The remaining statements are explained separately.

Default

MPLS is disabled.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.