TechLibrary

Navigation

Table of Contents

Guide That Contains This Content

[+] Expand All

[-] Collapse All

members

Syntax

members [(all | names | vlan-ids)];

Hierarchy Level

[edit interfaces ge-fpc/pic/port unit 0 ethernet-switching vlan][edit interfaces xe-fpc/pic/port unit 0 ethernet-switching vlan]

Release Information

Statement introduced in Junos OS Release 11.1 for the QFX Series.

Description

For trunk interfaces, configure the VLANs for which the interface can carry traffic.

Tip: To display a list of all configured VLANs on the system, including VLANs that are configured but not committed, type ? after vlan or vlans in your configuration mode command line. Note that only one VLAN is displayed for a VLAN range.

Options

all—Specify that this trunk interface be a member of all the VLANs that are configured on this switch. When a new VLAN is configured on the switch, this trunk interface automatically becomes a member of the VLAN.

Note: Each VLAN that is configured must have a specified VLAN ID when you attempt to commit the configuration; otherwise, the configuration commit fails. Also, all cannot be the name of a VLAN on the switch.

names—Names of one or more VLANs.

vlan-ids—Numeric identifiers of one or more VLANs.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.