Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Related Documentation
- Configuring Rate Limiting for the BGF in Session Border Control Solutions Guide Using BGF and IMSG
max-burst-size (All Streams)
Syntax
max-burst-size {default bytes-per-second;maximum bytes-per-second;minimum bytes-per-second;}
Hierarchy Level
[edit services pgcp gateway gateway-name h248-properties traffic-management]
Release Information
Statement introduced in Junos OS Release 9.2.
maximum and minimum options introduced in Junos OS Release 9.5.
Description
Configure the maximum burst size for gate streams of any protocol, including RTP.
Default
The virtual BGF uses the default value of 1000 bytes if the Policy command in H.248 messages in ON and both of the following apply:
- The maximum burst size is not set in the H.248 message.
- There is no CLI configuration for maximum burst size.
Options
default bytes-per-second—Default maximum burst size.
Range: 20 through 4,294,967,295
maximum bytes-per-second—Maximum burst size.
Range: 20 through 4,294,967,295
minimum bytes-per-second—Minimum maximum burst size.
Range: 20 through 4,294,967,295
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related Documentation
- Configuring Rate Limiting for the BGF in Session Border Control Solutions Guide Using BGF and IMSG
