TechLibrary

Table of Contents

Guide That Contains This Content

[+] Expand All

[-] Collapse All

lldp

Syntax

lldp {advertisement-interval seconds;disable;hold-multiplier number;interface (all | [interface-name]) {disable;power-negotiation {disable;}}lldp-configuration-notification-interval seconds;management-address ip-management-address;netbios-snooping;ptopo-configuration-maximum-hold-time seconds;ptopo-configuration-trap-interval seconds;traceoptions {file filename <files number> <size size> <world-readable | no-world-readable> <no-stamp> <replace>;flag flag <disable>;}transmit-delay seconds;}

Hierarchy Level

[edit protocols]

Release Information

Statement introduced in Junos OS Release 9.0 for EX Series switches.

Statement introduced in Junos OS Release 11.1 for QFX Series.

Description

Configure Link Layer Discovery Protocol (LLDP). The switch uses LLDP to advertise its identity and capabilities on a LAN, as well as receive information about other network devices. LLDP is defined in the IEEE standard 802.1AB-2005.

The remaining statements are explained separately.

Note: The transmit-delay and netbios-snooping options are not available on QFabric systems.

Default

LLDP is enabled.

Required Privilege Level

routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.