Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Related Documentation
- QFX Series
- Defining the Proxy Load-Balancing Algorithm
- Example: Configuring Automated Fibre Channel Interface Load Rebalancing
- Simulating On-Demand Fibre Channel Link Load Rebalancing (Dry Run Test)
- Understanding Load Balancing in an FCoE-FC Gateway Proxy Fabric
- Monitoring Fibre Channel Interface Load Balancing
auto-load-rebalance
Syntax
auto-load-rebalance;
Hierarchy Level
[edit fc-fabrics fabric-name proxy]
Release Information
Command introduced in Junos OS Release 12.3 for the QFX Series.
Description
Configure the system to rebalance NP_Port link loads automatically on an FCoE-FC gateway proxy fabric if the link loads become unbalanced. Load rebalancing is a disruptive action that forces some or all sessions (depending on the configured load-balancing algorithm) to log out and then log in again. When sessions log in again, they are placed on NP_Port interfaces so that the link loads are balanced.
Required Privilege Level
storage—To view this statement in the
configuration.
storage-control—To add this statement
to the configuration.
Related Documentation
- QFX Series
- Defining the Proxy Load-Balancing Algorithm
- Example: Configuring Automated Fibre Channel Interface Load Rebalancing
- Simulating On-Demand Fibre Channel Link Load Rebalancing (Dry Run Test)
- Understanding Load Balancing in an FCoE-FC Gateway Proxy Fabric
- Monitoring Fibre Channel Interface Load Balancing
